Kotani Chemical Industry Co., Ltd.
textileinfo
HOME
Top page
Contents
Soaping
Dyeing
Polyurethane staining inhibitor/RC
Staining inhibitor for CDP
Reduction clearing
Nylon staining inhibitor
Reasons for the development
Method 1
Method 2
Method 3
Use according to method
Prevention of
white-staining
in nylon/
polyurethane
Anti-scum for nylon
Staining inhibitor for wool blends
Retarding/leveling
Fixing
Dyebath softening
Fastness improver for spandex blends
Finishing
Correction
Functional finishing
Car seat
Search pages from texitileinfo

Nylon staining inhibitor for dyeing of nylon/cellulose blends
Neoleve NYC-D (direct dyes, neutral fixation type reactive dyes) and NYC-R (reactive dyes)

In dyeing method (3), Neoleve NYC-R can facilitate superior deep dyeing

This is two-bath dyeing of nylon/cotton blend with acid/reactive dyestuff. Neoleve NYC-R is an anti-nylon-staining agent most suitable for this procedure.

In order to attain high colorfastness in this dyeing method, reactive dyestuff is used for the cellulose side, and acid dyestuff with high fastness for the nylon side.

As reactive dyes are for the alkali side and acid dyes for the acid side, normally, one-bath dyeing is not possible.

Dyeing of cellulose is carried out first, then follows soaping in a boiling bath before dyeing the nylon side.

If the cellulose side is dyed after the nylon side, acid dye fixed to nylon can easily be washed off during soaping in a boiling bath after cellulose dyeing.

In cases of using vinylsulfone-based reactive dyestuff, careful selection is required since the degree of staining varies depending on the type of dye.

Hot type reactive dyestuff is convenient as it causes comparatively less staining.

fig. C

Copyright (c) 1999-, IS Co., Ltd. All Rights Reserved.
No reproduction or republication without written permission.
n.k@kotani-chemical.co.jp